September 21, 2023

FALLINGFILM

Make Some Fun

Clay Bead Bracelet – Concepts

6 min read

Let’s discuss clay bead bracelets—generally known as flat beads, too. If you’re trying to get into jewellery making, that is most likely one of many best and most cheap DIY jewellery you can begin with.

Plus, there are SO many alternative concepts for clay bead bracelets! I’m going to share heaps on this publish, however you’ll be able to dream up so many extra.

Clay beads are often product of polymer clay and are available in any and each coloration you’ll be able to consider. Clay bead bracelets are enjoyable to make for a lot of ages, together with older youngsters.

I really purchased my 13-year-old niece the identical clay bead kit I purchased myself and we each love making jewellery from it. Additionally, have in mind any of those clay bead bracelet concepts may very well be repeated or made bigger right into a necklace should you wished.

Associated: Take a look at extra DIY equipment in our jewellery archive.

Clay Bead Bracelet Provides:

  • Clay beads
  • Elastic cord/Crystal string – I like to make use of colours however clear works properly, too.
  • Acrylic letter beads and different accent beads or charms (some kits include these)
  • Crimping beads – for closures
  • Connectors – I exploit these on bracelets with an elastic wire so you’ll be able to pull it over your hand, so that you don’t want to lock a clasp, which may be troublesome one-handed.
  • Scissors – the smaller, the higher (some jewellery pliers would work for this too)
  • Jewelry pliers – for crimping beads and different jewellery making duties
  • Bead board – or a felt to cowl your work floor

There are a lot of alternative ways you’ll be able to design your clay bead bracelet with totally different equipment or clasp and closures. However these are the essential provides that I used to make the bracelets you see pictured.

Make Bead Bracelets:

  • Design your bracelet. I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This manner, I can be certain that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
  • Minimize a bit of elastic wire twice as large because the widest a part of your hand so you’ve lots to work with.
  • Loop the underside of the wire via a crimping bead, then one aspect of the connector, then again via the identical crimping bead once more.
  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
  • String your design onto the wire.
  • Verify that the bracelet is the size you design (if not, add or take off beads).
  • Add one other crimping bead to the top, loop the wire via the opposite aspect of the connector, after which via the identical crimping bead and pull tight.
  • Use your pliers once more to crimp down on the bead, fastening the wire in place.
  • When you have additional wire on both aspect, you’ll be able to snip it off and/or tuck it into the beads beside it.

Clay Bead Bracelet Concepts:

Listed here are some concepts for various sorts of designs and coloration combos you’ll be able to strive!

  • Multicolored! You possibly can repeat the colours or simply add them at random.
  • Use all major colours (crimson, blue, yellow)
  • Use all secondary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one coloration bead for a strong look.
  • All white or black
  • Break up clusters with charms or a glass bead.
  • Add your title or a pal’s title for gifting.
  • Add a appeal or a number of charms for a appeal bracelet look.
  • Fill many of the bracelet with small gold beads and use the coloured clay beads as an accent.

The place to Purchase Beads?

Under, I’ll hyperlink lots of the particular beads and charms I’ve purchased on-line. But in addition remember the fact that you should purchase beads and jewellery making provides from many alternative locations like thrift shops, property gross sales, Etsy and eBay.

Additionally, if in case you have previous jewellery that you simply not put on, you may take it aside and repurpose it in your designs.

  1. My favourite basic clay bead bracelet kit (contains wire and instruments)
  2. Metal letters
  3. Fruit charms
  4. Mushroom beads
  5. Freshwater pearl beads

Incessantly Requested Questions

What number of clay beads make a bracelet?

For an grownup with small to medium arms, 125-150 clay beads will make a bracelet. Chances are you’ll want roughly or smaller or bigger sized bracelets.

What string do you utilize for clay bead bracelets?

Elastic wire (generally known as crystal string) is greatest. You need to use clear or a coloration. However this wire could have some stretch so you’ll be able to simply pull the bracelet on and off your hand without having to make use of a clasp.

Are clay bead bracelets waterproof?

Polymer clay (which is often what clay beads are product of) is waterproof. Nonetheless, most bracelets could have different supplies like string and charms and these might not maintain as much as soaking.

Can clay beads be washed?

Sure. Gently wash with cleaning soap and water should you get meals or filth in your bracelet. The colours is not going to run or fade.

DIY clay bead bracelets are such a enjoyable mission anybody can do. I additionally love that it’s one thing you’ll be able to work on whereas watching a film. 🙂

Associated: 15 Crafts You Can Do Whereas Watching TV


Print

get the how-to
Get the How-To

how one can make clay bead bracelets plus a lot of concepts for designs

Prepare dinner 15 minutes

Complete 15 minutes

Directions

  • Design your bracelet – I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This manner I can be certain that I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.

  • Minimize a bit of elastic wire twice as large because the widest a part of your hand, so you’ve lots to work with.

  • Loop the underside of the wire via a crimping bead, then one aspect of the connector, then again via the identical crimping bead once more.

  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.

  • String your design onto the wire.

  • Verify that the bracelet is the size you design (if not, add or take off beads).

  • Add one other crimping bead to the top, then loop the wire via the opposite aspect of the connector, then via the identical crimping bead and pull tight.

  • Use your pliers once more to crimp down on the bead, fastening the wire in place.

  • When you have additional wire on both aspect, you’ll be able to snip it off and/or tuck it into the beads beside it.

Notes

Design concepts to strive:

  • Multicolored! You possibly can repeat the colours or simply add them at random.
  • Use all major colours (crimson, blue, yellow)
  • Use all complimentary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one coloration bead for a strong look
  • All white or black
  • Break up clusters with charms or a glass bead
  • Add your title or a pal’s title for gifting
  • Add a appeal or a number of charms for a appeal bracelet look
  • Fill many of the bracelet with small gold beads and use the coloured clay beads as an accent.
Copyright © All rights reserved. | Newsphere by AF themes.